Product Overview

The MovinCool Climate Pro K60 Portable Computer Room Air Conditioner Provides 60,000 BTUs of Cooling

With up to 60,000 Btu/hr of computer cooling capacity, the newly designed Climate Pro K60 portable computer room air conditioner will provide spot cooling to large offices and computer rooms that contain heat-generating electronics. Your server room needs continuous and portable cool air to offset the heat that these systems can generate. As an ideal server room air conditioner, the Climate Pro K60 prevents computer networks, communications, and office equipment from shutting down when temperatures rise.

For large heat-producing electronics and computer server rooms, you need the best portable spot cooler. The MovinCool Climate Pro K60 will protect your expensive equipment from over-heating and potential shut-down and can protect critical data from being lost with 60,000 BTUs of reliable cooling power.

MovinCool Climate Pro K60 Portable Computer Room Air Conditioner Features

• Color LCD control panel. Simplifies operation, clearing of codes, and is easier to read.
• Matte black cabinet brings stylish utility to the workplace.
• Added bumpers enable safer handling and movement around your facility.
• Larger casters make rolling and navigation easier.
• Built-in cable compartment. Keeps the power cord securely out of the way.
• Hinged tank cover. Keeps drain tank secure.
• Condensation pump included. Pumps water to remote drain for uninterrupted operation.
• Ergonomic drain tank design. Makes for easier handling and emptying.
• Built-in flanges. Standard on all models — no add-ons needed.
• Powerful performance. Runs on 208/230V 20 amp circuit and consumes 6.6 kW.
• Dual condensers provide cooling support effective in conditions from 65° to 105°F.
• Moderately quiet. At highest speed with condenser duct, sound level 69 dB(A).

MovinCool Climate Pro K60 Portable Computer Room Air Conditioner Technical Specifications

MovinCool Climate Pro K60 Installation Accessories

MovinCool Climate Pro K-60 Installation and Accessory List

All accessories are sold separately.
All accessories are sold individually unless otherwise noted.
Exhaust duct required in most cases.

Two-Nozzle Installation

1.
2-Piece Metal Base Plate has two 8-inch diameter holes to convert airflow from louvers to self-supported or flexible air ducts.

2.
8-inch diameter flange kit includes wire clamp and mounting screws. Used to attach the self-supported cold air duct to the two-hole base plate.
(Use with 8-inch diameter self-supported duct or 8-inch diameter flex-duct.)

3.
8-inch diameter self-supported duct extends from 6.5-ft to 10-ft in length. Provides specific, directional airflow.

4.
8-inch diameter x 25-ft Flexible Air Duct Includes Clamp. This flexible duct can be used to provide cool air to areas up to 25 feet away.

Four-Nozzle Installation

5.
Metal Base Plate has four 6-inch diameter holes to convert airflow from louvers to quick-connect, self-supported, or flexible air ducts.

6.
6-inch diameter quick-connect flange kit includes wire clamp and mounting screws. Used to attach the quick-connect nozzles to the four-hole base plate.
(Use with #7 quick-connect nozzles)

7.
6-inch diameter Quick-Connect Nozzle extends up to 2-ft in length. Includes trim ring.
(Use with #6 quick-connect adapter flange kit.)

8.
6-inch diameter flange kit includes wire clamp and mounting screws. Used to attach the self-supported cold air duct to the two-hole base plate.
(Use with #9 6-inch diameter self-supported duct.)

9.
6-inch diameter self-supported duct extends from 6.5-ft to 10-ft in length. Provides specific, directional airflow.

10.
6-inch diameter Trim Ring mounts on the end of the self-supported duct.
(Not required, but the trim ring prevents sharp edges and/or unraveling and completes the look.)

11.
The plenum attaches to the front of the unit for return air to the indoor heat exchanger.

12.
For Negative Pressure Rooms - When balanced airflow is required, attached the outdoor heat exchanger plenum with a 16-inch diameter duct from the side of the unit to an outside air source. The air to the outdoor heat exchanger is pulled from outside the room to eliminate problems associated with negative pressure. It attaches to the condenser intake side of the unit and is hinged for filter cleaning.
(Use with 16-inch Flexible Duct #13.)

13.
16-inch diameter Flexible Exhaust Duct extends up to 25-ft in length. Includes clamp.
(Used as a warm air exhaust duct or intake duct with negative pressure air plenum.)

14.
MovinCool makes it easy to remove exhaust air. Simply replace your existing ceiling tile with the HDK-16 Ceiling Tile Exhaust Kit. Place the Exhaust Flex Duct on top of the MovinCool unit and insert it into the specially cut ceiling tile.
Includes 1) 2-ft x 2-ft Ceiling Tile with 7-ft of 16-inch diameter Flexible Exhaust Duct.

15. Condensate Pump Kit 230V - INCLUDED
No need to bother with manually emptying the tanks. The condensate pump will remove the water automatically to any remote drain. Maximum lift – 17-ft. Includes 3/8-inch diameter x 20-ft length drainage hose installation hardware.

16.
When your MovinCool Portable Spot Cooler is not in use, protect it with this durable black nylon oxford unit storage cover.